Skip to Content

klick here

6 replies [Last post]
Mon, 01/18/2010 - 11:03am
WOSR501
User offline. Last seen 1 year 32 weeks ago. Offline
Joined: 01/15/2010
Posts:

allo all,

i've done:

inj cai

bc race header

a'pexi header back exhaust

hondata (boo) heat shield

silicone hoses

& small custom mods like a hood spacers, home depot front lip, etc..

 

as far as mapping goes, will i be ztraight with injen stage 2? or have my fellow accesstuners developed somethin better?

next month i'll have a tsx tb & p2r fuel rail /w rdx injectors; i'll make a new post bout those.

 

p.s. anyone else using a linux disro + wine for their AP software; or am i flying solo /w that?

p.p.s. pm if i must change my avatar

have a good one y'all

goin back under ze fg2 for an hour

p.p.s.s. i've got a k20z3 from a sedan; 2nd motor, not trying to need a 3rd.

__________________

traff1c

Top
Mon, 01/18/2010 - 9:49pm
#1
ruloSI
ruloSI's picture
User offline. Last seen 13 weeks 6 days ago. Offline
Joined: 07/06/2009
Posts:
Yo,   Nice picture!  Anyhow

Yo,

 

Nice picture!  Anyhow here are your answers:

  1. You can use the injen stage 2 v 1.03 for now, until the new rev-hang fix comes out (yes 1.04 is out but it has glitches
  2. before you install rdx read this (DO NOT INSTALL RDX INJECTORS JUST YET!)  COBB has yet to release software to properly control larger injectors.  You need to wait for now.
  3. If you're using linux, try vmware with xp or xen with xp.  I'm sure you can figure out how to do that :D.
  4. Love your avatar!!!  Change only if mods get on your a$$.
  5. Stop blowing your motors.

Welcome to the site!

Top
Tue, 01/19/2010 - 5:39am
#2
mully34dluvr
User offline. Last seen 2 years 6 weeks ago. Offline
Joined: 07/17/2009
Posts:
this pic is mully34dluvr approved!

I think I'm going to have to step up my game now with the rookie showing me up!  That picture is sweet. Teegs, do not fall in love. That is all, my work here is done.

Top
Tue, 01/19/2010 - 10:36am
#3
Teegs
Teegs's picture
User offline. Last seen 2 years 2 weeks ago. Offline
Joined: 07/06/2009
Posts:
Holy Crap!

I think my balls just dropped from becoming a man. Those nipples just poked me in the eyeballs. Yeah Mully, you better step it up real quick.

Top
Mon, 01/25/2010 - 1:59pm
#4
WOSR501
User offline. Last seen 1 year 32 weeks ago. Offline
Joined: 01/15/2010
Posts:
i'm more of a legs guy, cause

i'm more of a legs guy, cause they lead to an amazing... avatar. Just reinstalled GNOME/DEBIAN on ze netbook.

Any of y'all run the AP & a netbook/laptop at ze same time?

I'll have some numbers soon after I junkyard/ebay hop for that tsx tb. I'm about to search around about the skunk2/spoon ones.

 

Will BV1.InjenCAIstage2v9.5(+?) be out for 1.03 soon;

                  & how does that run?, cause I'm running rich with a hydroshield on.

Thanks for ze help too y'all.

edit: Got a JDM dual-funnel aluminum oil air fllter on.

__________________

traff1c

Top
Tue, 01/26/2010 - 1:22pm
#5
ruloSI
ruloSI's picture
User offline. Last seen 13 weeks 6 days ago. Offline
Joined: 07/06/2009
Posts:
wosr,   You probably need to

wosr,

 

You probably need to get your maf calibrated with the special filter.

Top
Sat, 10/02/2010 - 11:58am
#6
WOSR501
User offline. Last seen 1 year 32 weeks ago. Offline
Joined: 01/15/2010
Posts:
yeah, been running an apex.i

yeah, been running an apex.i power filter. bout to clean it.

so, with the AP no longer on the mainstream, are we just the underground left?

cause i was going to use it, even for the compound charge or no2 /w high reving cams\pistons, maybe with ITBs. I'm bout to junkyard hop for that tsx throttle body & try to find a friend to bore my rbc to 70mm.

oh, i did install my power rev racing fuel line, thinking of dual feeding or using the other end for nitrous in the future, two wet shots (one there, the other either in the cai, or intercooler with ITBs.

any thoughts, answers would be great. it's good to have internet back, i'll be in touch.

__________________

traff1c

Top